Milwaukee M18 Drill/Impact Driver Magnetic Bit Holder

A bit holder to fit Milwaukee's M18 Drills and Impact driver. Options for different size magnets and amount of bits.
20
91
2
718
updated February 2, 2024

Description

PDF

A bit holder to fit Milwaukee's M18 Drills and Impact driver. Designed on a non-fuel version but may fit Fuel as well. You can use either 20x6x2mm or 25x8x2mm magnets or slightly smaller, I used 20x5x2mm. There are options to fit either four or six bits. It can be fitted to either side.

Fit has been tested with both 4Ah and 5Ah batteries and clearance is fine. You will also need a suitable M3 screw to hold it in place, approx 12-14mm should do. I used a dab of super glue to hold the magnet in place.

I've also included a parameterised Fusion 360 file if you want to use a different size magnet.

Prints fine with no supports.

Model origin

The author marked this model as their own original creation.

License