135 Film Case - 3x & 5x Versions

I made these 135 film cases and thought I'd share them.
70
557
6
1633
updated December 25, 2024

Description

PDF

 



I made these 135 film cases and thought I'd share them.

Just like my medium format (120) film cases, these come also as a 3 and 5 roll size option. The lid is symmetrical so it fits in either orientation and the registration pins hold it in place.

Print these with 2 outer perimeters (0.4mm nozzle, print width set to 0.45mm) and 20-30% infill. For the lid I recommend activating the "detect thin walls" (in Prusa Slicer) or whatever the equivalent is in your slicer, so the thin walls of the lid are printed with just one single extrustion line in the center instead of two lines very close to each other. Otherwise you will get a very noticable step/bulge where the thin wall starts printing.

Enjoy and if you like the result, please share a make photo.

 

Print Settings

Printer Brand:

Printer: Creality CR-10S

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 20-30%

Filament: Prusament PLA MysticGreen & GalaxyBlack

Tags



Model origin

The author marked this model as their own original creation.

License