Tenstorrent e150 Fan adapter bracket

Just the basic adapter to work from for making a bracket for a Tenstorrent e150 AI card
0
16
0
121
updated January 30, 2024

Description

PDF

Just the basic adapter to work from for making a bracket for a Tenstorrent e150 AI card to get a fan snugly against the back of the card.

 

It is HIGHLY recommended to print this in something like ABS which has a very high heat tolerance as the card does in fact get quite hot.  Note you'll also need to make sure that you provide sufficient air movement to keep the card reasonably cool.

Using this fan shroud may void your warranty on the card, and is unsupported by Tenstorrent.

Model origin

The author marked this model as their own original creation.

License