ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R)

Remix of the enclosure designed by @mdkendall, adjusted for the USB-C board version. Self-tapping version only.
51
626
9
3299
updated January 30, 2024

Description

PDF

Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites.

Model adjusted for the USB-C board version, which does have slight variations of the connector positions (especially mounting holes & USB-C connector).

Note: Self-tapping version only

Print settings

  • Material: PETG
    • PLA should be fine as well, probably with less flex on the buttons. The board gets warm on the back, but I don't think it's that warm to melt PLA.
  • 0.4mm nozzle
  • 0.2mm layer height
  • 3 walls
    • 2 is probably fine as well
  • 15% infill or more

Required hardware

  • 4x M3x6 Socket Head screw (self-taps into plastic)

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

  • USB-C connector slot position adjustment
  • SD card reader slot position adjustment
  • Other connectors slightly adjusted as well (unverified)
  • Better positioning for the Boot Button
  • LED (on the back) exposed
  • ESP32 ventilation slits

License