Pellet Dropper Purging Sytem for MMU setups

A pellet forming and ejecting mechanism similar to the Bambu Lab purging system
14
62
0
453
updated January 31, 2024

Description

PDF

Update: Changed rotation of purse housing to intended printed orientation

BOM

3mm I.D. Bowden tube
MG90 Servo
M2.5x8 Self Tapping Screws
3 M3x14 Screws
2 M3x16 Screws
1 M3x6 Screw
1 M3x8 Screw
4 M3*4*5 Heatset Inserts

All parts can be printed in any material however it is recommended to print the flap out of ABS. The pellets may melt to the flap and become stuck if a lower tempature material is used.

 

The macros were created specifically for my printer so your settings/macros will be different
The included macros are designed to wipe horizontially so if you need to mount it to the side of the printer you'll need to edit the macros yourself
Make sure to edit the following values if you are using the included macros

[gcode_macro WIPE_NOZZLE]
description: Wipes the nozzle on the wiper
# X location of the center of the wiper in respect to the nozzle
variable_wiperlocationx: 
# Y location of the center of the wiper in respect to the nozzle
variable_wiperlocationy: 

Tags



Model origin

The author marked this model as their own original creation.

License