This is a cover plate for the emergency release latch on the passenger side door to help avoid unintended use which can damage the door trim.
Recommend printing in PETG or other high-temperature material.
For single filament printers you only need the first tm3perc stl (or tm3perc_lh for our friends across the pond). The other two files (TM3PERCbase and TM3PERCtext) are for use on a multi-material printer. Place the base, then add the text to the base. Finally rotate to put the flat side down. On my Slicer (Prusa) I had to change the width of external perimeters from 0.45 to 0.4 during multi-material printing to avoid gaps in the text.
Update: On request, I added a version without the text.
Category: Automotive
The author marked this model as their own original creation. Imported from Thingiverse.