Gridfinity 19.2mm Thread Spool Holder 2x3

Holds 15 spools of thread that are 19.2mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 19.7mm to easily hold a 19.2mm spool.

Went with a more minimalist approach. Extruded circles out from baseplate instead of cutting circles into a thicker baseplate. Removed brim.

Version 2 is more minimalist, print separate from the legs, print 4 legs, glue legs to corners. This design is meant to stay in the drawer/location, if you need it stronger, glue on more legs, in the middle.

Enjoying adding on to the wonderful creation of Zack Freedman's Gridfinity

Gridfinity Tips!

• No brims or support required!
• Use any filament with an 0.6mm or smaller nozzle.
• Wider bins can curl, so maximize your bed adhesion if you're going big!
• All storage blocks are compatible with all baseplates!
• Most storage blocks are stackable!
• You can add 6x2mm magnets to the corners! They won't magnetize the contents.
• You can also use M3 screws in the corner