Dremel 220 Workstaion soldering iron holder for SREMTCH 80W soldering iron Dremel 220 Workstaion

I modified the soldering iron holder from https://www.printables.com/de/@John_248786 and clamp to fit the dimensions of my soldering iron.

I use this soldering iron https://www.amazon.de/dp/B08R3J9GRV?ref=ppx_yo2ov_dt_b_product_details&th=1

The clamp and holder are attached with 4x M3x16 mm screws, and you should also insert 4x M3 threaded inserts into the holder.

I printed the mounting in rPET from Formfutura. To see if it could withstand the temperatures, I set my soldering iron to 450°C and left it on for 10 minutes.
It worked completely fine.

I modified the holder and clamp to fit the dimensions of my soldering iron