Drawer Handle with/without honeycomb 125mm/M6

Scad remix drawer dandle:
Distance between the screws: 125mm
Screw hole diameter: 8mm
Screw head hole diameter: 13mm
Material thickness (between screw head and base: 5mm
Screw_Countersink_Angle: 90°
Handle_Material_Thickness: 10mm
Height of handle: 18mm
Handle_End_Length: 20mm
Hand_Hole_Width: 90mm
Hand_Hole_Depth: 20mm
Radius of bevel: 1,5mm
 

update V1.2: centered the combs 

Print Tipp: print it facing down, no supports, and brim depending on your filament, I used 10mm outside and also filled the honeycombs inside while using Prusament PC jet black.

• enlarged it to 125mm and fitted it to my demands
• M6 inkl. compensation distance
• added honeycomb 
• added modifier (3mf and stl attached)

update V1.2: centered the combs