Monaco 3D Miniature (Large)

Large 3d miniature of the Principality of Monaco!

Smaller version of Monaco: https://www.printables.com/model/724871-monaco-3d-miniature-f1-edition

Check out my collection of other Large miniature cities: https://www.printables.com/@jarvisar_1334825/collections/1199502

Slicing & Printing Details

This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. 

Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!

Note: If roads or small details are disappearing after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls.

Framing Details

This model measures almost exactly 7.5x9.5in (242.31mm X 191.08mm) and should fit most 8x10 frames (assuming frame lip/overlap is around a half-inch). Feel free to change the scale/size of the model(s) to meet your needs.

I also included a large printable frame (w/ 1mm water plate) designed to fit my large miniature cities!

Note: This is a “large” miniature and will not fit the smaller ~5x7inch printable frame included with the other miniature cities!

Personally I use these cheap frames from Amazon: https://www.amazon.com/dp/B08XVP48KQ

And blue printer paper: https://www.amazon.com/dp/B00006IDQT

A frame is not required! This model looks great by itself and can be displayed almost anywhere.

Other Details

Model created in Blender using the Blosm addon.

I also have many other models available for download on MakerWorld!

See my Patreon for a commercial license, early downloads, polls towards future models, and more!

Buy me a coffee :)