Ender 3 S1 Z-Axis Camera Blink Mini Mount

I wanted to use a Blink Mini camera to monitor prints with the ability to easily remove both the mount to the printer as well as the camera. The mount slides onto the Z axis from the side (don't try to push it on from the front). The camera slides into the platform with just a touch of friction.

The camera mount is overly beefy IMO, if I remake this I would consider reducing the camera platform and sides to 2mm (or thinner) thickness. Also I might lower the platform a touch so the camera is more inline with the nozzle.

Printed on Creality 3 S1 with PLA and 30% infill.

Replaced the raspberry Pi camera holder with a base for Blink Mini camera.