Anycubic Kobra+ LED Light Bar Mount v3.0

This light bar mount is designed to be used in conjunction with the LED strip that is found at the link provided below. It attaches using two 3mm Allen-head bolts (either 40 or 45 mm long - I can't remember so once I get home, I'll update this description) and a couple of sliding T nuts so you don't have to dismantle the overhead gantry to install the mount.

LED strip: https://amzn.to/3vPgyU9

3mm bolts: https://amzn.to/42em0M8

Sliding T Nuts: https://amzn.to/3u9aeGr

The mount should work on any overhead gantry that uses a slotted aluminum bar with a 20mm slot facing upwards. It is designed with some degree of cable management on the right-side mount. If you need it on the left side, just mirror the design to get it to the left side. If you have a Kobra Plus or Kobra Max, my Wiring Stack (https://www.thingiverse.com/thing:6385078) is a great way to hide the verticle portion of the power cable.

Print Settings

Printer Brand:

Anycubic

Printer:

Kobra

Rafts:

No

Supports:

No

Resolution:

.20mm is sufficient, .15mm if you want a smoother surface

Infill:

25% is sufficient

Filament: Overture PLA Matte Navy Blue