{"data":{"model":{"id":"736656","slug":"xlcam-prusa-xl-raspberry-pi-camera","name":"XLCam - Prusa XL Raspberry Pi Camera","authorship":"author","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"4.9000000000","myRating":null,"ratingCount":10,"description":"

Update 2024/04/27: Published XLCam v2. Better viewing angle and new mounting location.

Update 2024/04/02: Added link to screw assortment.

Update 2024/27/02: Added info for adjusting the camera aim.

Update 2024/29/01: Added links for USB-C right angle and long camera cable. Noted 4GB capacity used on RPi 4.

Printing

STLs are provided for left and right mounting. I printed in PETG, Black, Orange, White. Orient the model on the flat surface in PrusaSlicer then paint supports on the lower edges of the camera shroud. Set supports for enforcers only.

Assembly

The Raspberry Pi 4 (I used a 4GB) and camera V2 are held in place with a couple of screws each. You'll need a longer ribbon cable for the camera and a right angle USB-C adapter for the power cord. The USB-C cable and ethernet cables can be routed down the slot in the aluminum extrusion. An STL is provided for a Chanel cover that snaps in place.

USB-C right angle
Long camera cable
Screw Assortment

A single 4mm screw and a T-nut are used to hold the case in place.

The camera module and Pi are attached with small screws (see link to screw assortment above; super handy for all sorts of projects).

You can add one or more washers behind the camera module on one or two of the posts to adjust the aim of the camera to your liking.

Software

I have my Pi set up to serve a video stream locally and also to upload snapshot images to PrusaConnect every 20 seconds. You can use any Pi software you like, the instructions for my setup are below:

Start with an image of the lite version of the latest RPi OS; I used Bookworm 64-bit. Set the host name; I used \u201cxlcamera\u201d. Set a user name and password.

Boot up the Pi and SSH into it at xlcamera.local.

Check Camera

libcamera-hello

Increase GPU memory

sudo nano /boot/config.txt

add the following line:
gpu_mem=256

Get Packages

sudo apt update
sudo apt install git
sudo apt-get install imagemagick

Install Streamer - https://github.com/ayufan/camera-streamer

git clone https://github.com/ayufan-research/camera-streamer.git --recursive
sudo apt-get -y install libavformat-dev libavutil-dev libavcodec-dev libcamera-dev liblivemedia-dev v4l-utils pkg-config xxd build-essential cmake libssl-dev

cd camera-streamer/
nano html/camera.html

<html>\n  <head>\n    <title>XLCam</title>\n        <meta http-equiv=\"content-type\" content=\"text/html;charset=utf-8\">\n  </head>\n  <body  style=\"margin: 0; padding:0;\">\n         <div>\n          <img id=\"stream\" src=\"./?action=stream\" style=\"width: 100vw; height: 100vh; object-fit: contain; object-position: 50% 0%;\" />\n         </div>\n  </body>\n</html>

nano cmd/camera-streamer/http.c

add:
extern unsigned char html_camera_html[];
extern unsigned int html_camera_html_len;
and
{ \"GET\", \"/camera\", http_content, \"text/html\", html_camera_html, 0, &html_camera_html_len },

Build

`make`
`sudo make install`

Set up service

nano service/camera-streamer-printercam.service

; Official Raspberry Pi v2.1 8MP camera based on the Sony IMX219 chip\n; https://www.raspberrypi.com/products/camera-module-v2/\n;\n[Unit]\nDescription=camera-streamer web camera for Pi Camera on Raspberry PI\nAfter=network.target\n\n; v2 camera\nConditionPathExists=/sys/bus/i2c/drivers/imx219/10-0010/video4linux\n\n[Service]\nUser=root\nExecStart=/usr/local/bin/camera-streamer \\\n  --camera-path=/base/soc/i2c0mux/i2c@1/imx219@10 \\\n  --camera-type=libcamera \\\n  --camera-format=YUYV \\\n  ; camera module v2\n  --camera-width=1640 --camera-height=1232 \\\n  ; use full height for all streams \n  --camera-snapshot.height=1232 \\\n  --camera-video.height=1232 \\\n  --camera-stream.height=1232 \\\n  --camera-fps=15 \\\n  ; use two memory buffers to optimise usage\n  --camera-nbufs=2 \\\n  ; bump brightness slightly\n  --camera-options=brightness=0.1 \\\n  --camera-options=sharpness=9 \\\n  --camera-options=noisereductionmode=HighQuality \\\n  --http-listen=0.0.0.0 \\\n  --http-port=80 \\\n  --rtsp-port\n\nDynamicUser=yes\nSupplementaryGroups=video i2c\nRestart=always\nRestartSec=10\nNice=10\nIOSchedulingClass=idle\nIOSchedulingPriority=7\nCPUWeight=20\nAllowedCPUs=1-2\nMemoryMax=250M\n\n[Install]\nWantedBy=multi-user.target

Start Service

sudo systemctl enable $PWD/service/camera-streamer-printercam.service
sudo systemctl start camera-streamer-printercam
sudo systemctl stop camera-streamer-printercam

Status

journalctl -xef -u camera-streamer-printercam

tmp as ramdisk

sudo nano /etc/fstab
add:
tmpfs /tmp tmpfs rw,nosuid,noatime,nodev,size=256M,mode=1777 0 0

Reboot

Live stream should now be available at:

xlcamera.local/camera

Prusa Connect

nano uploadsnapshots.sh

Fingerprint: This is a unique string identifying the camera. An example would be:
a606dbc84f08373703b8eb6c4d7805b1fd687c45
Change 10 of the digits in that string to other random digits and you should be good.

Token: Sign in to Prusa Connect, go to the Camera page for the printer, then add a new Other camera. Use the token that's shown in the script below.

--------------------\n#!/bin/bash\n\n# Set default values for environment variables\n: \"${HTTP_URL:=https://webcam.connect.prusa3d.com/c/snapshot}\"\n: \"${DELAY_SECONDS:=20}\"\n: \"${LONG_DELAY_SECONDS:=60}\"\n\nFINGERPRINT=\"???\"\nTOKEN=\"???\"\nSNAPSHOTURL=\"http://127.0.0.1/snapshot\"\n\nsleep \"5\"\n\nwhile true; do\n    now=$(date)\n\n    # grab from streamer\n    curl -s \"$SNAPSHOTURL\" -o /tmp/output.jpg\n\n    # If no error, upload it.\n    if [ $? -eq 0 ]; then\n        # echo \"$now: Uploading snapshot...\"\n\n        datestr=$(date)\n        convert /tmp/output.jpg -quality 85 -filter lanczos -resize 800 -pointsize 18 -fill white -undercolor '#00000080' -gravity southwest -annotate +10+10 \"${datestr}\" /tmp/annotated.jpg\n\n        # POST the image to the HTTP URL using curl\n        curl -X PUT \"$HTTP_URL\" \\\n            -H \"accept: */*\" \\\n            -H \"content-type: image/jpg\" \\\n            -H \"fingerprint: $FINGERPRINT\" \\\n            -H \"token: $TOKEN\" \\\n            --data-binary \"@/tmp/annotated.jpg\" \\\n            -s \\\n            --compressed\n\n        # Reset delay to the normal value\n        DELAY=$DELAY_SECONDS\n    else\n        echo \"$now: Snapshot returned an error. Retrying after ${LONG_DELAY_SECONDS}s...\"\n\n        # Set delay to the longer value\n        DELAY=$LONG_DELAY_SECONDS\n    fi\n\n    sleep \"$DELAY\"\ndone

Permissions

Make file executable
chmod +x uploadsnapshots.sh

crontab -e

fill in your <user>
@reboot /home/<user>/uploadsnapshots.sh >> /home/<user>/snapshots.log 2>&1

Create log file:

echo > snapshots.log

Reboot and everything should be good to go.

","category":{"id":"134","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"134","name":"Prusa Parts & Upgrades","nameEn":"Prusa Parts & Upgrades","description":"Explore upgrades, parts and modifications! Enhance your Prusa 3D printer with spool holders, camera mounts, LCD covers, fan shrouds, and more, including the Lack enclosure \u2013 all designed to optimize your Prusa MK4, XL, MINI, MK3S+, SL1S and more.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-27T19:50:03.595571+00:00","firstPublish":"2024-01-27T16:00:58.364831+00:00","datePublished":"2024-04-27T19:50:03.573421+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"Compact case for a Raspberry Pi 4 and Pi Camera V2 that mounts to the end of the upper arm on a Prusa XL.","likesCount":125,"makesCount":11,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":264,"displayCount":3724,"filesCount":7,"privateCollectionsCount":120,"publicCollectionsCount":93,"pdfFilePath":"media/prints/736656/pdfs/736656-xlcam-prusa-xl-raspberry-pi-camera-01f959f4-da07-4110-bf88-dbb9cb47409f.pdf","commentCount":35,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"2702592","filePath":"media/prints/736656/images/5781573_defbe6f7-7151-4f5c-81d1-a8ef5411b879_8ed40f6a-1440-4c9c-8c0c-27705370d906/img_2069.jpeg","rotation":0,"imageHash":"VQgKDgKel8l9aEeDh0CZuLh60MYWf1s=","imageWidth":1476,"imageHeight":1688,"__typename":"PrintImageType"},"images":[{"id":"2702592","filePath":"media/prints/736656/images/5781573_defbe6f7-7151-4f5c-81d1-a8ef5411b879_8ed40f6a-1440-4c9c-8c0c-27705370d906/img_2069.jpeg","rotation":0,"imageHash":"VQgKDgKel8l9aEeDh0CZuLh60MYWf1s=","imageWidth":1476,"imageHeight":1688,"__typename":"PrintImageType"},{"id":"2702593","filePath":"media/prints/736656/images/5781574_7f5baa96-927a-4a20-86d3-72e47f5c5423_671acd45-9299-45a7-b89e-5a2b2c282a3e/img_2070.jpeg","rotation":0,"imageHash":"VggKFwL5mJeSZXhdhkemiHl3aF/J8ZgO","imageWidth":1440,"imageHeight":1494,"__typename":"PrintImageType"}],"tags":[{"name":"camera","id":"41","__typename":"TagType"},{"name":"cameramount","id":"1974","__typename":"TagType"},{"name":"webcam","id":"2376","__typename":"TagType"},{"name":"raspberrypi","id":"2973","__typename":"TagType"},{"name":"prusaxl","id":"13883","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"3121921","filePreviewPath":"media/prints/736656/stls/5757787_9745cf25-7eb9-47fa-a260-5d9c33522cb7_cf3ef794-a0ed-41ad-95e0-ecf24e3b1d50/case-right_preview.png","__typename":"STLType"},"license":{"id":"2","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"54456","handle":"RandyUbillos_54456","verified":false,"dateVerified":null,"publicUsername":"Randy Ubillos","avatarFilePath":"media/auth/avatars/6c/6cef4929-2c10-47d0-92ed-30f7814f0b11.jpg","badgesProfileLevel":{"profileLevel":12,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"705362","name":"3D Printed Shirt","slug":"3d-printed-shirt","ratingAvg":"0E-10","likesCount":802,"liked":null,"datePublished":"2024-01-20T15:58:01.862381+00:00","dateFeatured":null,"firstPublish":"2024-01-03T20:08:03.746676+00:00","downloadCount":618,"mmu":false,"category":{"id":"18","path":[{"id":"17","name":"Fashion","nameEn":"Fashion","__typename":"CategoryType"},{"id":"18","name":"Men","nameEn":"Men","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-01-20T15:58:01.883894+00:00","image":{"id":"2595815","filePath":"media/prints/705362/images/5535028_b7427297-fcaf-4f39-934d-8234fb25bf94_f3675d90-71fb-4f72-a4bd-d58566857ead/cover.jpg","rotation":0,"imageHash":"3FoKHIS18pqemImZd3lniYBzBg==","imageWidth":3447,"imageHeight":2016,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"54456","handle":"RandyUbillos_54456","verified":false,"dateVerified":null,"publicUsername":"Randy Ubillos","avatarFilePath":"media/auth/avatars/6c/6cef4929-2c10-47d0-92ed-30f7814f0b11.jpg","badgesProfileLevel":{"profileLevel":12,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"730433","name":"3D Printed Shirt V0.9","slug":"3d-printed-shirt-v09","ratingAvg":"0E-10","likesCount":163,"liked":null,"datePublished":"2024-01-21T01:53:22.132286+00:00","dateFeatured":null,"firstPublish":"2024-01-20T16:40:37.096803+00:00","downloadCount":194,"mmu":false,"category":{"id":"18","path":[{"id":"17","name":"Fashion","nameEn":"Fashion","__typename":"CategoryType"},{"id":"18","name":"Men","nameEn":"Men","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-01-21T01:53:22.152680+00:00","image":{"id":"2671944","filePath":"media/prints/730433/images/5715187_90ee2e27-96ca-4064-8c86-816eb34ddd37_f00f89b2-39cb-40a2-a323-ef9244e6d7eb/img_1024.jpeg","rotation":0,"imageHash":"XwgGLQbr/qmI+Id1iYyH17eAfQvI","imageWidth":1189,"imageHeight":1524,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"54456","handle":"RandyUbillos_54456","verified":false,"dateVerified":null,"publicUsername":"Randy Ubillos","avatarFilePath":"media/auth/avatars/6c/6cef4929-2c10-47d0-92ed-30f7814f0b11.jpg","badgesProfileLevel":{"profileLevel":12,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"859688","name":"XLCam v2 - Prusa XL Raspberry Pi Camera","slug":"xlcam-v2-prusa-xl-raspberry-pi-camera","ratingAvg":"5.0000000000","likesCount":59,"liked":null,"datePublished":"2024-04-27T19:48:47.323789+00:00","dateFeatured":null,"firstPublish":"2024-04-27T19:48:47.320387+00:00","downloadCount":198,"mmu":false,"category":{"id":"134","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"134","name":"Prusa Parts & Upgrades","nameEn":"Prusa Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-27T19:48:47.338948+00:00","image":{"id":"3075581","filePath":"media/prints/859688/images/6606300_992c0b72-342a-4c96-a7aa-ed83bc5113c5_6a4e3a99-c7be-4476-a658-2cd2e889ecda/img_2535.jpeg","rotation":0,"imageHash":"HggKDYL+tHi+VId7mbdWZXrxjQW+","imageWidth":2014,"imageHeight":1318,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"54456","handle":"RandyUbillos_54456","verified":false,"dateVerified":null,"publicUsername":"Randy Ubillos","avatarFilePath":"media/auth/avatars/6c/6cef4929-2c10-47d0-92ed-30f7814f0b11.jpg","badgesProfileLevel":{"profileLevel":12,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"},{"id":"736656","name":"XLCam - Prusa XL Raspberry Pi Camera","slug":"xlcam-prusa-xl-raspberry-pi-camera","ratingAvg":"4.9000000000","likesCount":125,"liked":null,"datePublished":"2024-04-27T19:50:03.573421+00:00","dateFeatured":null,"firstPublish":"2024-01-27T16:00:58.364831+00:00","downloadCount":264,"mmu":false,"category":{"id":"134","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"134","name":"Prusa Parts & Upgrades","nameEn":"Prusa Parts & Upgrades","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-04-27T19:50:03.595571+00:00","image":{"id":"2702592","filePath":"media/prints/736656/images/5781573_defbe6f7-7151-4f5c-81d1-a8ef5411b879_8ed40f6a-1440-4c9c-8c0c-27705370d906/img_2069.jpeg","rotation":0,"imageHash":"VQgKDgKel8l9aEeDh0CZuLh60MYWf1s=","imageWidth":1476,"imageHeight":1688,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"54456","handle":"RandyUbillos_54456","verified":false,"dateVerified":null,"publicUsername":"Randy Ubillos","avatarFilePath":"media/auth/avatars/6c/6cef4929-2c10-47d0-92ed-30f7814f0b11.jpg","badgesProfileLevel":{"profileLevel":12,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isHiddenForMe":false},"latestContestResult":null,"__typename":"PrintType"}],"featured":true,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}

XLCam - Prusa XL Raspberry Pi Camera

Model files

Model origin

License