Ender 3V.2 Screen Table Stand

A holder for your Ender 3 V2 screen to keep on a table instead of the stock position .
0
10
0
88
updated January 23, 2024

Description

PDF

I modified my Ender 3 V.2 to have the motheboard and the screen out of the closed glass chamber i made for better heat conservation.

The screen was always laying on the table so thought to make a stand for it for easier access and useability.

Made this simple platform which can easily be locked with 2 M4/M3 Screws and nuts, plus i made an adjuster thread to add a 3D designed long nut to act as a height adjuster (model not done yet but its pretty easy do make).

Keep in mind i've used a 1mm Nozzle so my print was fast for this size (took 2 Hrs only) but if you use different one it will be normal.

DONT EXCEED 50mm/sec Print speed as corners will be spoiled.
Model might need small tweaking with head when inserting the nuts (MAYBE).

Have fun and let me know if you needed any help.

 

-Nozzle : 1mm
-Layer Height : 0.7mm
-Line Width : 1mm
-Walls : 4
-Top/Bottom : 3
-Extruder Temp : 225
-Bed Temp : 70
-Infil : 30%
-Brim : YES 3-5 Lines
-Speed : 40mm/sec

Tags



Model origin

The author marked this model as their own original creation.

License