LM2596 Voltage Regulator Enclosure / Box
Parts needed
(Designed for 3mm wood screws, but with some force you should be able to use ordinary M3 screws)
OBS!! For now the button is in two peices that needs to be glued together(the bottom sides), then glued to the top part of the case in the cut out. The little spike on the "button pin" should be at the same side as the display. (see image here)
Hope you like it! Post your "Makes" and if you have any questions post a comment :)
Notes:
The author marked this model as their own original creation. Imported from Thingiverse.