Raspberry Pi 3 A+ Case

Recently I configured my printer to run on Klipper, this means I run a Raspberry Pi along side the printer in order to control it. This case was designed in order to improve the aesthetics of the Pi and to protect it.

This case fits using pressure and fits reasonably loosely for easy access.

There is attached a file to do a 2 colour print, make sure to make these line up in your slicer before printing. The file "pi_case_logo" has a large zero thickness brim - this is to allow to simply centre it and the top for easy alignment.

The file “pi_case_top” needs to be flipped so that the top is facing onto the build plate.