Remodeled the original model so that the tip of the Bosch GAS25 vacuum cleaner tube could be connected at once. To join the original finished part "body2" I drilled out the holes with a 2.5mm drill (careful not to drill through) so that the M3x10 screws could be screwed in more easily.
“Переделал оригинальную модель, чтобы наконечник трубки от пылесоса Bosch GAS25 подсоединялся сразу”. Чтобы соединить в оригинальной готовой детали "body2" рассверлил отверстия сверлом 2,5мм (осторожнее, чтобы не просверлить насквозь), чтобы винты М3х10 вкрутились полегче.
The author remixed this model.
Remodeled the original model so that the tip of the Bosch GAS25 vacuum cleaner tube could be connected at once.
“Переделал оригинальную модель, чтобы наконечник трубки от пылесоса Bosch GAS25 подсоединялся сразу”.