Pivoting Raspberry Pi 7inch Screen Mount

Simple pivoting mount for the offical 7inch raspberry pi touch screen [https://www.raspberrypi.com/products/raspberry-pi-touch-display/].
Perfect for your klipper screen UI or other pi projects.
Pivot mount designed to fit on the leg of an IKEA Lack table and is attached with three screws driven into the leg of the table. 
M6 Bolts are simply driven into mount so no nuts are required.

Printed in PLA+, 20% infil, 1.2mm wall thickness, no supports.

Adational Hardware:
2x M6 bolts between 35-50 mm
4x M6 Washers - for pivot
4x M3 8mm bolts - to mount screen
3x Screw 3-5mm width, up to 50mm length

Other notes:
Requires bed size of atleast 215mm in one direction