Wider version of the “Fully 3D Printed Spool Holder” to fit wider spools.
Print instructions
PLA
The bearings have a 0.15 mm tolerance for the moving parts. Your printer should be able to handle this.
I used 0.15 mm layer hight for the bearings (FINE setting in PrusaSlicer)
The other parts can be done with deafult settings.
In addition i printed the rollers with outer and inner brim (default is just outer) for them not to get loose. The bearings might work better with randomized seam position, altough i havent tried that.
The author remixed this model.
Widened the rollers from 110 to 160mm to fit wider spools like the prusa 2kg ones. Widened the base to 166.4mm to fit.