Hey y'all! I designed this trippy little planter a while ago and finally got around to doing a test print. Gotta say that I love the way it turned out. The perfect gift for the plant person in your life.
It can easily be scaled up or down to suit your needs. See pictures for size comparison next to tape measure.
No supports needed but I highly advise using a 0.2mm first layer and 0.14mm or thinner layer height for the rest.
General settings used in the print pictured:
Nozzle: 0.4mm
First Layer: 0.2mm
Remaining Layers: 0.14mm
3 Walls
5 Solid Top/Bottom Layers
5% Gyroid Infill
Max cooling on all outer walls/overhangs
There is a .3mf for a Bambu A1 you can download as well with all my settings if you happen to have an A1 as well. They just did an update recently and claim their .3mf's are now universally compatible with other slicers so it may work for non-A1 users as well. Let me know if it does.
Happy printing and happy gardening!
The author marked this model as their own original creation.