TwoTrees SP-5 Top Frame Bracket

Use requires both the model and its mirror to be printed.  These brackets attach to the top of the front of the printer frame at the same positions as existing fasteners. The mating frame requires the following 20mm series extrusion parts:

• 2x 400mm (front-to-back)
• 2x 375mm (l-to-r)
• 4x height of your choice
• 4x 3-way corners

Depending upon the version of the SP-5/Sapphire Plus, the existing fasteners may require substitution with longer ones to account for the additional 2.5mm of thickness of these parts.

All holes are close clearance for M4 fasteners.

Update: 18 March 2024

Uploaded the .stp for a panel to go on top of the frame. It was modeled at the same time as the bracket but not previously uploaded.  As before, holes are sized for clearance to M4 fasteners.