5M and 5M Pro nozzles slide down into this storage so they have a snug but not too tight fight. Be sure to align the guides on the side with the slots in the nozzle for this.
I printed the lids with supports due to the cutout on the bottom of them. I also did a pause at layer for the logo twice. First pause was for the blue, then second for the black.
This uses 6x3mm magnets.
The author remixed this model.
This version was done up as I do not use gridfinity storage. I shortened the box overall and added a lid with magnets since I have a lot of those for other projects.
This uses 6x3mm magnets.