CYD Mount ESP32 Display 2.8 inch LCD for The 100
Description
PDFHow to install:
If you have a completed The 100 printer, you only need the two parts here. They will replace the “Frame Connector Front 2” part if you are printing the entire printer with this included. You will install “Frame Connector Front 1” at the rear of the front bottom frame support and this case will go at the front.
Model origin
The author remixed this model.
Differences of the remix compared to the original
I combined the front mount for the bottom frame of The 100 with the case made by Teaching Tech. Assemble the case with the nuts installed and then secure to the frame in reverse order. The M3 screws will come from the back and go into the nuts that are inside the case.
You can purchase the screen here.
If you don't have an account with Aliexpress you can create one here and make an order to help me out with a few cents. :)
If you want to learn more about the CYD Klipper project you can check it out here.
