DnD terrain rollers – Symbols

These digital 3D printable models of Stamp Rollers are meant to be used to create patterns of various terrains for Dungeon and Dragons! They can be used on modeling putty, clay, or XPS polystyrene. The rollers are 15 cm high and the pattern length is 10 cm (6×4 squares, each 2.5 cm).

The download contains 11 original texture rollers (STL) ready to be 3D printed. 

Join our Printables Club to gain access to hundreds of amazing texture rollers! 💛

• You can use the whole roller to create an amazing wall or ground for your DnD adventures, or you can combine the texture roller with a cutter to create tombstones and smaller objects.
• Another idea is to slice just a part of the roller in your slicer before printing to choose the part of the pattern you like the best.

SIZE
At 100% scale, the large roller’s dimensions are approximate:
Width  30 mm
Length  30 mm
Height  150 mm
You can scale the model as you wish, but we can’t guarantee that the model will print well at a much smaller size.

3D PRINTING SETTINGS
The rollers are designed to perform the best when printed on SLA printers, but you can print them on FDM as well.
If you decide to print on FDM, use these settings:
– Layer height 0.15 mm
– Infill 0%
– Outer perimeters: 0.35 mm
– Retractions: off

Printing settings will vary greatly depending on your specific printer.

These models were brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: Social Media Links

Join our Printables Club to gain access to hundreds of amazing texture rollers! 💛