Lampenzieher Lamp extractor remover T1 3/4 5,5 mm | 5,6 mm 5,3 mm 5,0 mm

Tool to remove T1 3/4 lamps from their sockets. Different sizes because they are all lamps are little bit different.
1
9
0
68
updated January 17, 2024

Description

PDF

Tool to remove T1 3/4 lamps from their sockets.

Just push the tool over the glass part of the lamp (or plastic part if it is LED) and then pull the lamp to extract it.

Different sizes because they are all lamps are little bit different.

Those lamps are also called midget groove lamps.

I made them in diameter sizes 5,0 mm, 5,3 mm and 5,6 mm. The nominal socket size is 5,5 mm, but there is tolerance for the lamps production wise.

 

Print in flexible filament! (I printed them in 95A-TPU)

I used 0,12mm layer height (first layer 0,2mm) but probably 0,2mm for all of them would have also been fine.

All of the different sizes were able to extract my lamps.

But since production batches can be different I made three sizes to hopefully have at least one working suction tool.

 

The diameter is printed on the lower side of the model.

I printed the model with the numeric text (size) on the bottom with no supports.

Tags



Model origin

The author marked this model as their own original creation.

License