Snowy Mountain Napkin Holder(No Folding)

Love the mountains? Like your napkins? Then this the perfect model for you, use your napkins as snow for a mountain.
10
31
0
316
updated June 7, 2024

Description

PDF

Love the mountains? Like your napkins? Then this the perfect model for you, use your napkins as the snow for a mountainous napkin holder. This model is a napkin holder which uses 7.5 in  by 4.5 in napkins as the snow for a napkin holder. No folding required at all just set them in and your done. 

Printing Tips

  • Print all the pieces with the hole facing the build plate, and for the center print it with the side with 5 holes facing the build plate
  • I printed with 0.6mm nozzle at 0.4mm layer to reduce printing time but any layer height or nozzle should work.
  • On the left and right pieces use 5% infill to reduce printing time and material used.

Connecting pieces

  •  To connect the pieces you can tension fit the poles with the post there are two sizes if they are to losses or tight then you make the post in PrusaSlicer the holes are 0.3 in so make them small then that and make the post 0.9 inches tall. You will need a total of 8 posts
  • You can also glue the pieces together if you want. 

Tags



Model origin

The author marked this model as their own original creation.

License