Filament Cutter for LGX Lite and Sherpa Mini
Description
PDFThis is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it.
If you are using the LGX Lite mount with the Dragon Burner you must use the Sherpa_Mini_Extruder_Mount.stl to mount the LGX Lite Cutter to the Dragon Burner.
https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
You need to super glue the #11, Exacto Knife Blade into the Blade_Holder_Bottom.stl
For the LGX Lite you need: 2 x m3x8 to bolt the LGX_Lite_Cutter_Top.stl to the extruder. 2 x m3x40 to bolt the assembly to the Dragon Burner
For the Sherpa Mini you need: 2 x m3x40 to bolt the assembly to the Dragon Burner
Credits go to these 2 guys for starting this project. I took it and cleaned it up and made it work for the LGX Lite as well. I also fixed the cutter hitting the sherpa mini extruder.
Check out the start of this here: https://www.printables.com/model/599936-filament-cutter-sherpa-mini-ercf-v2 https://www.printables.com/model/622289-filament-cutter-for-sherpa-and-sherpa-patterned-ex
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
This is a filament cutter to LGX Lite and Sherpa Mini extruders. I have been using it on Dragon Burner. However you can use it on any hotened mount that can have an extruder mounted to the top of it.
https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
You need to super glue the #11, Exacto Knife Blade into the Blade_Holder_Bottom.stl
I used a spring out of a ball point pen and stretched it out to fit the cutter. You can also use some like this https://www.amazon.com/Customized-Galvanized-Compression-Diameter4-Diameter18mm/dp/B089JYV7BT
For the LGX Lite you need: 2 x m3x8 to bolt the LGX_Lite_Cutter_Top.stl to the extruder. 2 x m3x40 to bolt the assembly to the Dragon Burner
For the Sherpa Mini you need: 2 x m3x40 to bolt the assembly to the Dragon Burner
Credits go to these 2 guys for starting this project. I took it and cleaned it up and made it work for the LGX Lite as well. I also fixed the cutter hitting the sherpa mini extruder.
Check out the start of this here: https://www.printables.com/model/599936-filament-cutter-sherpa-mini-ercf-v2 https://www.printables.com/model/622289-filament-cutter-for-sherpa-and-sherpa-patterned-ex
