UniFi Express Mount for Leviton Structured Media Cabinet (or wall mount)

UniFi Express mount for a Leviton Structured Media Cabinet.  The holes are 5 inches on center.  UniFi Express can be inserted right side up or upside down to best fit your application.  The opening on the bottom is large enough for the screen or all the cables + reset button.  Works with the Leviton push pins or you can print your own push pins.  You could also use this to mount it to a wall.  

I printed it in PETG

Settings I used:

• 3 perimeters
• 5 top layers
• 5 bottom layers
• Organic supports on the overhangs and bridging  

Adapted this model for use in Leviton Structured Media Cabinets.  Cut a hole in the bottom for the screen or wires to come through.  Added 2 holes 5" apart and tabs that connect the two 3d models in the original.  Removed hex mounts.