Extrusion keyboard mount

Keyboard mount for 1530 aluminum extrusion. Fast print with minimal hardware required.
4
36
0
277
updated January 16, 2024

Description

PDF

A keyboard mount designed to attach to 1530 aluminum extrusion. Attaches using just a single screw and T-nut per side. It's reversible, so it can be mounted either on the front of the extrusion (as pictured) or on the rear. 

I've been using these on my flight sim rig for over a year with no issues or structural failures, even with plain PLA.

May also work on 2040 extrusion, but has not been tested by me.

  • This object should be printed with the outside face toward the print bed. See picture for orientation.
  • Support is required for the small nub that fits into the extrusion slot. This is what allows it to stay straight and only require a single point of attachment.
  • Only one file is included here. It is the left side mount. For the right side, simply mirror the object in your slicer. This is a standard feature of all modern slicers and allows for this print to be a single file of the smallest possible size.

My example was printed on an Ender 3 V2 using a .6mm nozzle and .24mm layer height with 15% infill.

Tags



Model origin

The author marked this model as their own original creation.

License