Gridfinity Vase Mode Bins With magnets

Three different bins for Gridfinity to be printed in vase mode:

• 1x1x9
• 1x2x6
• 2x2x6

Print Settings:

Enable vase mode and configure number of bottom layers to correspond to 6mm (20 for 0.3mm layer height, 30 for 0.2mm layer height). I printed these with a 0.6mm nozzle

 I really like the original model but wanted to have magnets press-fitted instead, so I changed the holes (6mm x 2mm). I recommend using my https://www.printables.com/model/738693-gridfinity-magnet-jig-pressure-fit but you have to be careful and support the inside of the bin, otherwise it might break inserting the magnets

Changed holes for magnets to be press-fitted