After I received my machine, the silicone pads where unglued it.
So I design my own version on TPU printed on the Creality K1 because I don't want to spend 5 € + shippment.
Clean up the remaining glue with isopropyl alcohol.
You only need superglue and also, after that, I perform a calibration test (only leveling) to ensure that my prints will print as same as I toke out from the box.
Print a bunch of them, so you will have as spare in case that anyone gets unglued again.
DONATIONS WILL APPRECIATE HERE: https://www.buymeacoffee.com/gepigom2883
The author marked this model as their own original creation.