IKEA NORDMÄRKE phone stand

Hi,

This is my phone stand for QI charger IKEA NORDMÄRKE.

It is designed for Samsung Galaxy S20FE or another phone wit same dimensions (160x75x12 in case). Stand is little bit modular. Contains from body and insert. Insert can be easilly changed for smaller phones (like Galaxy S9), please write me a comment with dimensions of your phone.

The stand has an integrated space for the USB-C connector and cable. For better stability, you can stick 4pcs of silicone round pads 8mm/1,5mm

To complete parts, use standard 2pcs of M4x10 screws.

My mistake, the skirt is also inside the model, so I had to cut it out. So it's not pretty, but it's at the bottom, so who cares :-)

Printed from PLA, MK2.5S+ 0,6mm nozzle.

layer 0.15-0.2

no supports needed

From a height of approx. 105mm, reduce the printing speed to 50% to prevent deformation because of short time for layer.

Happy printing