an IV Bag holder for IKEA shelf but should work for any shelf width of 25mm.
My cat requires liquid IV for his kidneys every few days so I was looking for a solution that will let me keep him on my work table while I work so I can keep an eye on him.
Inspired by a different design for a door but wanted to have one for a shelf.
Print with at least 3 walls
If you're using an IV BOX use the hook design and skew it by 10% to allow enough clearance for the IV box mounting hole
Initially designed a wide fancy holder but it wasn't stable and had too much play (momentum was too high) so I came up with a narrow design which doesn't require any supports.
If you have a different shelf edit the f3d file and update ShelfWidth
and don't forget to include tolerances - for me the shelf width was 25mm and printer tolerance of 0.5mm so the parameter is set to 25.5mm
The author marked this model as their own original creation.