HueForge - Toby

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA+ Esun Bone White Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey
At layer #11 (0.96mm) swap to Bone White
At layer #16 (1.36mm) swap to White for the rest.