8bitdo Arcade Stick Keyboard Keys

This is a series of parts I designed for my 8bitdo arcade stick to use standard keyboard switches in place of the arcade stick.

The "plate" screws into the holes from the original joystick. The "plate" interfaces with the "inner" part at 15 degree increments. The 90 degree point is marked when the arrow on the "plate" and "inner" are matched up. The "outer" part twists into the "inner" part, locking it in place. The "keys" part is then used to hold your keys and slot into the "outer" part.

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

No

Resolution:

0.28