I have printed this stand in PLA. To save some time, I used a layer height of 0.3 mm for most of the print. However, for the first 5 layers, I used a layer height of 0.2 mm to ensure a better adhesion to the bed. I also used an infill of 15% with a gyroid pattern, which was enough to make the stand sturdy and stable. You can experiment with different infill settings or increase the number of perimeters to achieve a 100% infill, but I found that it was not necessary for this model.
I am building a NAS from an old HP EliteDesk 800 G8 SFF, and this stand allows me to have the PC in a vertical position so it saves some desk space, as the PC occupies less horizontal area.
I hope you like my 3D printing project. If you have any questions or feedback, please let me know.
The author marked this model as their own original creation.