Carved Honeypot Planter

This is a roughly spherical decorative flowerpot resembling a hand carved honey pot featuring small surface imperfections.

It's designed to hold an inner pot, thus having no drainage hole.

—

At 100% scale the inner diameter and inner height is 10 cm each. You can scale accordingly to fit your inner pot. It's not recommended to make it smaller than 5 cm (i.e. 50%).

—

Printing tips:

• Does not need support if the layer height is at most half the nozzle diameter (e.g. 0.2mm layer height for a 0.4mm nozzle).
• Print the inner perimeter/wall before the outer perimeter.
• Use random Z seam placement.
• Printing in vase mode is not recommended due to the ~45° overhang at the bottom.

—

Trivia:

The bottom surface is supposed to be printed in black. If you have support for multicolor prints, feel free to do that.

—