Utility Case Carry Rack System

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

https://paypal.me/muddymaker

UPDATE Jan 15th- Added a wall mount adapter and wall mount bracket for both carry rack systems. The model files are titled to which carry rack they are for. The wall mount bracket is universal, meaning it will accomodate both systems. The carry racks are removable from the wall mounting bracket for transport to your job site or fishing spot:). Just like the accessory adapters, superglue the wall mount adapter into the hex holes on the back upright of the carry rack system with the blank end towards the top.

UPDATE Jan 14th- Added an optional accessories adapter and side box. There are two types, one for the double decker carry rack and one for the low boy carry rack. Simply superglue the adapter into the hex holes on either the left or right uprights or both if you want side boxes on both sides, the blank end goes towards the bottom. The boxes are ideal for long tools like screwdrivers etc or fishing equipment like knives etc and being modular the boxes are also removable.

UPDATE Jan 13th- Added an optional foldable carry handle. You will require an additional 2 M3x16mm fasteners for the hinge points.

Utility case carry rack system for one Utility Case Double Decker and one Utility Case Low Boy and also a carry rack for three Utility Case Low Boys. The print files are titled as such depending on which carry rack system you require.

Ideal for a fishing tackle box or small parts storage system that can be wall mountable and/or transportable.

Parts you will require; 

6 M3x40mm fasteners

2 M3x10mm fasteners for the fixed handle, and an additional 2 M3x16mm fasteners if you opt to use the foldable handle instead.I recommend 20mm fasteners with the fixed handle if you are going to have a lot of weight in your cases.

Length of 1" or 25mm strap 

Buckle

Optional 1" or 25mm velcro

NB: All of the fasteners screw into the plastic.

I used a buckle system in this model but you can also use a length of velcro instead. Hot glue one end into the provided slot in the bottom and hot glue a short piece of the reverse side on the top so when you thread the velcro through the slot on the top the velcro secures your cases in place. The length you will need will depend on wether you print out the model for one double decker and one low boy (as shown here in the photo description) or the low boy version that will accomodate three low boy utility cases. 

All of the uprights are marked with L, R, or B on one end. They all go to the bottom facing in. You shouldn't see them once your carry rack is assembled.

The Utility Cases can be found here:

https://www.printables.com/model/678588-utility-case-low-boy

https://www.printables.com/model/699027-utility-case-double-decker

No supports are required.

Happy printing.