Pinecil Holder for Portable Soldering Iron Case

This model aims to swap the bearing holder to another one which could not soften with extended soldering sessions.
23
93
2
895
updated January 12, 2024

Description

PDF

This is a grip hold for the Pinecil soldering used and it is aimed for use on Termiman's storage box or any of its variations.

The goal of the model is to have a reliable support for the soldering iron for extended amounts of time, as I had troble with the bearing/nut stands that are currently available, and there wasn't any suitable grip clip for the Pinecil, so I decided to make my own.

I would strongly recommend using PETG so it can wheather the heat and flex as it grips and releases the iron. As per printing settings 3 perimeters and 50% should be enough for this print.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

I adapted the Grip Clip concept from jostsalathe and remade it from scratch to fit the Pinecil soldering iron, still having as a goal fitting the clip within the storage box by Termiman.

License