Miniature Giants Causeway desk model. Print the base in green for grass or blue for sea.
Recommended slicer settings
Base:
- In your slicer rotate it to print upright on the long side nearest to rocks, see picture. This will give you the detailed shimmer effect seen in pictures.
- 0.2mm layer height
- Select brim in your slicer, I used a brim width of 5. This helps support the print and is easily removed after.
Rocks:
- 0.2mm layer height
- Enable ironing in your slicer to make the rocks smooth on top.
Filment used:
eSun green PLA +
eSun blue PLA +
Matt grey PLA
Printer:
Prusa i3 MK3S
Any questions leave me a comment!
Tags
The author marked this model as their own original creation.