Very handy to keep a few meters of different small diameter wire types at hand. Great for prototyping and such. It is not meant to handle/take bigger diameter wires. I use them for the small stuff like 0.2mm enamelled copper wire and 0.6mm litz wire.

It does hold about 5 to 6m of the Ø0.6mm wire and >10m of 0.2mm copper wire.

Print time is 1h30m for a set of three
friction can be maximised by putting a rubber band over both hooks
two holes of Ø3.5mm, 20mm apart for mounting
can be stacked by putting a M3 all thread through the holes. You may want to add one or two washers between individual spool holders then

Spools clip in easily and snap in place:

Cable can be pulled easily, friction always adjusts because of the outer “snap rings”:

Is this thing useful to you?

Don't hesitate to hit the ❤ and show some love. I'm always happy to hear from you in the 🗩 comment section. If you have problems printing my files: tell me in the comment section too!

Provided files

I do like to have real CAD-files, when downloading things from others. Most users don't provide files other than .STL-files. These are useless for further manipulation or quick changes. So I'll provide the following files to you:

Format	Included?	Description
STL	✓	-
STEP	✓	Version 214
FreeCAD	✓	Version 0.19 Link Branch

Is it easy to build/assemble?

Yes, just print both parts and clip them together.

What do I need other than the printed parts?

small piece of tape to fixate the start of the wire to the spool

Is this thing finished?

YES

Print Settings

Here are some general guidelines on how to print this thing.

Rafts: Not necessary

Supports: Not necessary

Resolution: 0.2 … 0.3

Infill: 100%

Filament: PETG, ABS, ASA. Printing the clip in PLA might be too sturdy/brittle.

Clip-In cable/wire spool

Description

Recent updates