This is a completely print-in-place sliding tile puzzle. There are six models and a customizable puzzle you can make simply using PrusaSlicer!
The tiles are unable to be taken out of the containment ring.
The experimental custom puzzle file ("Create Custom Puzzle in PrusaSlicer.3mf") allows you to create your own puzzle directly in Prusa Slicer with almost any model! Instructions are shown at the bottom of the description.
Feel free to modify all of the .stl's with attribution, and If you make one post a picture!
After printing go around to each tile and make sure it is fully separated from it's neighbors, the precision required is very tight in order to keep the tiles fully captive. If your printer is having trouble, try scaling the model 10-20%.
Using Slic3r or equivalent software you can also do a filament swap to get different colored numbers on the tiles. You can also glue a picture to the front of the tiles and use an exacto knife to cut through the gaps to make a completely custom puzzle.
The author marked this model as their own original creation.