Mini version (remix) of Rugged Box (Parametric) by Whity using single hinge.
BOM (bill of materials)
Mechanical parts | QTY |
---|---|
M3x30 SHCS/DIN 912 Bolts (Source: INT) | 3 |
Printed Parts | |
---|---|
Bottom, lid, latch, seal | 4 |
PRINT GUIDELINES |
Here are print guidelines for you to follow in order to have decent success with printing parts:
3D PRINTING PROCESS | Fused Deposition Modeling (FDM) |
INFILL TYPE | Grid, Gyroid, Honeycomb, Triangle or Cubic |
MATERIAL | PLA, PETG, ASA, ASA-CF, ABS, ABS+, ABS-CF |
INFILL PERCENTAGE | 40% |
LAYER HEIGHT | Recommended: 0.2mm |
WALL COUNT | Recommended: 4 |
SOLID TOP/BOTTOM LAYERS | Recommended: 5 |
EXTRUSION WIDTH | Forced 0.4mm |
ASSEMBLY MANUAL |
Tighten screws until you hear plastic cracking, then ½ turn back :) Re-print and repeat until succeed. (Just in case — this is not an actual advice.)
The author remixed this model.
Mini size, single hinge, lesser depth of box bottom