Remix K1 riser with hinges for lid, added vents (open/close), PTFE tube exit out right rear to the side.
Lid height change, added vents (open and close), added a better entry for PTFE tube.
21
174
1
1381
updated July 3, 2024
Model files
K1 riser hinged print set_v16 (left-right front x2).stl
K1 riser hinged print set_v16 (Main vent).stl
K1 riser hinged print set_v16 (right rear).stl
K1 riser hinged print set_v16_REAR (Main vent).stl
K1 riser hinged print set_v16 (Slide vent).stl
K1 riser hinged print set_v16 (left rear).stl
K1 riser hinged print set_v16 (lid left).stl
K1 riser hinged print set_v16_REAR (Slide vent).stl
K1 riser hinged print set_v16 (lid right).stl
Model origin
The author remixed this model.
Differences of the remix compared to the original
- Changed the lid height to 48mm for better clearance for the PTFE tube.
- Added vents for each side. It can be opened, closed, or completely removed for desired chamber temp control. Magnets are used in the two parts of the vents to hold the vent open or closed even with the earthquake the K1 makes, and they provide a nice click when changing to open or closed.
- Added cover for opening in the lid as a part of the rear vent.
- Added better PTFE entry through the right rear riser to the side where everyone likes their spool holder.