8x32 LED Matrix Frame with Diffuser Grid

8x32 LED Matrix Frame

• No glue*, tape or screws needed
• Accessible USB port
• Wall- or desk-mounted
• Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation
• Optional socket-less version

*  I suggest gluing the two front frame pieces together

Instructions

Print:

• 2xFront SPLIT
• 2xDiffuser SPLIT
• 1xBackL SPLIT
• 1xBackR SPLIT

Print the Diffuser Screens with these settings  to give the screen a horizontal “scanline” texture:

• Top/Bottom surface pattern: ALIGNED RECTILINEAR
• Internal solid infill pattern: ALIGNED RECTILINEAR
• Sparse infill pattern: ALIGNED RECTILINEAR
• Infill direction: 0

If using white filament for the Diffuser Screen, printing it on a textured plate will make it scatter more light and be dimmer. Use a smooth plate for best results. A textured plate will work great for clear filament though :)

For the LED matrix, you'll need:

• 8x32 LED Matrix - e.g. https://aliexpress.com/item/4000544411175.html
• ESP-Wroom-32 - e.g. https://aliexpress.com/item/1005005972312714.html
• MAX4466 microphone - e.g. https://aliexpress.com/item/3256803608057399.html
  or
  MAX9814 microphone - e.g. https://aliexpress.com/item/3256805923391884.html
• Power Supply 5V 1.5A-15A (~2-5A will do for most uses) - e.g. https://aliexpress.com/item/32844702891.html or  https://aliexpress.com/item/1005006126703620.html
  or an old USB cable (cut one end and connect the + and - to the LED matrix)

LED Matrix/ESP32/WLED Assembly Guide:

Some useful resources:

• WLED Project: https://kno.wled.ge/
• Chris Maher WLED tutorials playlist: https://www.youtube.com/playlist?list=PLur8dX5PE-4pk838s_gZAdm-98-sf0f0Z
• Make It Work WLED tutorials playlist: https://www.youtube.com/playlist?list=PLUTKOGJvdIQ8WYfG6TDJ_c8_WlPovWbL9

My other LED projects:

https://www.printables.com/@fractalnoise/collections/1236469