I wanted to print one of these for my brother as a present, but could not find one that allowed me to print the parts properly in different colors so I remixed two existing designs and modified them (cut them up, and added some features that were missing) to get a simple print in different colors.
I also created a stand for the Gun that is located here:
https://www.printables.com/model/709024-stand-for-malcolm-reynolds-gun-from-firefly
I also remixed a Serenity model (cut it in half and shrunk it) to go on the stand here:
https://www.printables.com/model/709032-serenity-model-for-stand-for-malcolm-reynolds-gun-
The gun is a (in Firefly universe) "Moses Brothers Self-Defense Engine Frontier Model B" nicknamed the "Liberty Hammer".
I printed the gun in 4 different colors - Bronze (Barrel, Main Body, and Clip), Silver (Trigger and Knurls), Wood (Handles), and Black (Alignment pieces). I printed it at .15mm Layer Height. The Model is meant to be glued together (I used superglue). All Parts but Knurls, Handles, and Alignment pieces will need supports.
Parts:
- Main body - (40.1mm x 86.9mm x 209mm)
- Right Handle - (80.08mm x 120.59mm x 10mm)
- Left Handle - (80.08mm x 120.59mm x 10mm)
- Knurl - (x2) - (9mm x 9mm x 9mm)
- Trigger - (206.97mm x 8.1mm x 111.03mm)
- Barrel - (31.6mm x 31.6mm x 125mm)
- Clip - (17mm x 68.13mm x 32.63)
- Barrel Alignment
- Handle Alignment Half - (x2 - one on each side and glue them together)
- Alternate Full length version
- Trigger Alignment Half - (x2 - one on each side and glue them together)
- Alternate Full length version
The author remixed this model.
I remixed two existing designs and modified them (cut them up, and added some features that were missing) to get a simple print in different colors.