Prusa Mini+ Base - Lazy Susan for filament spool

Nice

Working perfectly for all the rolls that can't be hung under the base

Black parts printed on Prusa Mini, White parts printed on E3Pro

The "lazy Susan bottom" was the only part I needed, and it snapped three times, even with 100% infill and 7 walls. I fixed it with gorilla glue.

must have for a mini+. It works well with the base if you print that as well.

Prints and works nicely

This works great for those spools that don’t play nice with the mini base.

Absolutely perfect for the little 250g sample rolls KiwiFil sells that are too narrow to be stood up vertically.

For smaller, loose, rolls of filament the 52mm version pairs well with the expandable spool holder found here: https://www.printables.com/model/5627-print-in-place-adjustable-filament-sample-spool/comments

I printed the 52mm version in eSun PLA+ Black with a 0.6mm nozzle and 0.3mm layers.

Really nice, fast to print, fits perfect together and runs very smooth with my Amazon Filament Rolls. Simple and great Design.

I was looking for a lazy susan style filament holder. This worked out really well. The top part didn't quite work well enough for my Overture spools, so I re-created it in Fusion360 to fit tighter and also make the inner extrusion taller. Works with my Ender PLA spools as well. Then I went with a smaller inner diameter print to fit my Prusament spools.

Great upgrade to the mini base for non-pursament rolls