Modular drawers with under desk mount - experimental

Since this is in its early stage this is prone to change a lot except for its rail system and its main dimensions such as drawers.

Bigger drawers will be added eventually but for now, this is the only model for a while until I am happy with the shape and general functionality.

It's a very basic box shape, but this is also prone to change as long as the railing features and rails don't suffer from the change.

I would appreciate any wishes for features ppl would like to see, as I want to try to implement what most ppl want first and then move on to other ideas.

I'm also thinking about implementing a locking mechanism for the rails so they can't slide at all. With my design, they can only slide in one direction for now. 

I printed my drawers at a layer height of 0.28mm with a 0.4mm nozzle.

if you struggle with getting the rails into the slot, just clean up the edges, force it in a little bit, and slide it back and forwards until it moves easier, that seemed to work fine on my cheap 150  USD printer and when I printed the normal rail on its side I did not need any clean up.

the reason why the drawer has two different finishes on its sides is that I have not decided what to do exactly, I might remove it and make some kinda of locking mechanism into the rails in the main body, or slot it differently.

Hope to improve this and make something interesting in the end.