EE-3 Carbine Rifle Star Wars

This is a variation of the EE-3 Carbine with a shorter stock (Not an exact copy of Boba Fett's EE-3).

I've organised all the parts into separate plates ready to print in their optimal orientation. Most parts were designed to need very little support or non at all to keep the prints looking as clean as possible.

All the parts are split by colour for those who would rather print in colour and skip the painting process.

I'd recommend printing the part that connects the grip to the stock on 100% infill or with more walls.

I've cut holes in many areas for screws to be used instead of gluing, although gluing is still an option.

If you want to use screws you'll need…

• 3x M3 Socket 8mm (Stock)
• 4xM3 Socket 20mm (Loading Chamber)
• 4x M3 Socket 5mm (Scope)

The thread measurements don't always have to be exact, they are just recommendations. I chose socket screws as the parts are designed for the socket heads to sit flush in the cutouts.