A simple basic module for building your own antenna. This base part of the antenna is designed to fit a commonly available water pipe with a diameter of 20 mm.
There are two versions. one is designed for self-tapping screws and the other version is designed for threaded inserts and metric screws.
Pipe - 8020_FA : https://www.kopos.cz/cs/produkt/1269-tuha-hrdlovana-trubka-s-vysokou-mechanickou-odolnosti
Print parameters
Nozzle: 0,4 - O,2
Layer: 0.2
Supports: NO
Material: PET, ASA
>> If you want to buy me a coffee, you can for any amount, I will be very grateful. <<
Don't forget to follow my profile so you don't miss anything. It costs nothing and made me happy. Thanks in advance.
Don't forget to upload a photo of your print and share.
Thank you very much for your support.
The author marked this model as their own original creation.